ApplicationApplication

about usabout us

Fuzhou Xskylink I/E Co., Ltd. was established in 1990’s from a small factory. Now X-sprayer factory covers an area of 20,000 square meter. We mainly engaged in spare parts for Graco, Wagner and Titan airless paint sprayers. With the experience and capital accumulation, in 2005, X-sprayer explored the production into complete machine, from 3.0L to 6.3L.

We manufacture airless paint sprayers and spare parts: piston rods, cylinders, extension rod, repair kit, tips, spray gun, high pressure hoses, tip guard and various valves. Our fittings could be exchangeable with Graco, Titan and Wagner. We choose the best raw material to make selected products for our customers. X-sprayer was started with Graco spare parts and then developed to make the whole machine, with very good quality and competitive price.

Featured productsFeatured products

latest newslatest news

  • Maintenance method of spraying machine

    1.Maintenance of spray line and spray room. If the air supply system of the spray cabinet is blocked or there is too much dust, replace the air filter cotton, and open the back of the spray cabinet to clean the oil filter system in about three days. At the same time, it is also necessary to clean the greasy dirt on the conveyor chain from time to time and add butter. 2.Oil supply system maintenance. When the spraying machine needs to be shut down after use, open the paint return valve to make all the paint flow back to the ink tank, take out the ink tank, pour the cleaning solvent into the ...

  • Common causes of problems affecting nozzle spray

    The nozzle needs maintenance, regular inspection, cleaning and even replacement, so as to ensure the final product quality and maintain the economic benefits of the production process. The manner and frequency of the repair procedure depends on the application. The maintenance plan can be arranged according to the use, liquid and nozzle material. There are seven common causes of nozzle spray problems: 1.Corrosion and wear: the material on the surface of nozzle nozzle and internal flow channel gradually becomes larger or deformed, thus affecting the flow, pressure and spray shape. 2. Corrosi...

  • Spray Hose advantage

    High pressure hose is an important power mechanical transmission product, which can support high-level water or air pressure. It is made of stronger materials than low-pressure hose (rubber and steel wire). High pressure spraying hose. The product is suitable for high-pressure spraying equipment. The inner pipe is nylon pipe. The pipe wall is smooth and not easy to scale. The middle is braided with high-strength polyester yarn, so that the high-pressure pipe is not easy to be discounted. Appearance colors are blue, red, etc. Nylon pipe adopts brand-new raw materials and has good physical, c...

  • Operation of spray gun

    In the process of spraying, improper operation of the spray gun will affect the spraying effect of the product. A good spraying effect is as follows: 1. The coating is evenly distributed; 2. The coating cannot be too thick or too thin. The main points to be noted in the operation of the spray gun include: the moving speed of the spray gun, the control of the trigger, the gun distance and the gun holding posture, etc. the following is Xsprayer for you to elaborate: 1、 Movement speed of spray gun. During spraying operation, the moving speed of the spray gun has a great influence on the coati...

  • How to choose spraying machine

    1.For powder spraying equipment, the performance of the equipment is mainly the powder feeding rate and powder feeding capacity. For the processing capacity of complex workpieces, this index is difficult for friends who come into contact for the first time to understand. We must carefully understand and carefully compare. The powder feeding capacity of high-voltage built-in electrostatic plastic spraying machine is much higher than that of high-pressure external products. In addition, there is often a large gap in the performance of similar products from different manufacturers; The perform...