A.The paint film is of good quality, and the coating is smooth and fine without brush marks. It sprays the coating under pressure into fine particles, which are evenly distributed on the wall surface, which is unmatched by the original methods such as brushing and rolling.
B.High coating efficiency. The spraying efficiency of single person operation is up to 200-500 m2 / h, which is 10-15 times that of manual brushing.
C.Good adhesion and long coating life. It uses high-pressure jet to make the atomized coating particles obtain strong kinetic energy; The paint particles take this kinetic energy to shoot into the pores to make the paint film more dense, so as to enhance the mechanical bite force between the paint film and the wall, improve the adhesion of the coating and effectively prolong the service life of the coating.
D.Uniform film thickness and high coating utilization. The thickness of manual brushing is extremely uneven, generally 30-250 microns, and the coating utilization rate is low; The coating thickness of 30 microns can be easily obtained by airless spraying.
E.High coating utilization rate – compared with brush coating and roller coating, airless spraying does not need to dip materials during on-site construction, and there will be no first drip and leakage, so as to avoid coating waste; What is more different from the traditional air spraying is that airless spraying is atomized coating rather than atomized air, so it will not cause the coating to fly around, pollute the environment and cause waste. In the process of using the spraying machine, more than 90% of the faults encountered by users are caused by incomplete cleaning, improper maintenance or normal wear and tear of components. Therefore, the correct use and maintenance training of equipment is very important.
The above are the advantages of using the spraying machine. In this society with rapid development of science and technology, we can’t stand still, because the consequence of your standing still is that you will be constantly surpassed by the people around you, and you will fall farther and farther until you are eliminated by the society. Therefore, we should accept the view that “machines replace labor” is the general trend. Let’s welcome the era of science and technology
Post time: Nov-03-2021